s do not scale from this print .776 19.71 ref .485 12.32 ref "a" "a" fig. 1 (pmsdx-05-xx-xx-xx.xx-s shown) ipbd-xx-d *** = not released for production *** (no of pos x .165[4.19]) + .040[1.02]) ref .378 ref 9.60 .478 12.14 ref 01 06 02 10 xx.xx (see note 17) s s section "a"-"a" c dwlx-01-xxxx-s-xx.xx-xx-xx pmsdx-xx-xxxx-xx-xx.xx-x-xxx no of positions -02 thru -15 (per row) -s: single end -d: double end (must choose lus, lds, lux, ldx, mus, mds, mux, or mdx) lead style -sp: standard power (c-169-xx-sp-t) -hp: high power (c-169-xx-hp-t) (see note 18) wire gauge (awg) -16, -18, -206, -203, -22, -24 end option -m: metal latch (use ipbd-xx-d-m) (leave blank for plastic) double -lus: plastic latch up, straight -lds: plastic latch down, straight -lux: plastic latch up, crossed -ldx: plastic latch down, crossed -mus: metal latch up, straight -mds: metal latch down, straight -mux: metal latch up, crossed -mdx: metal latch down, crossed option single specify in inches 3.00 inches minimum for single ended 3.50 inches minimum for double ended [use dwcx-xx-xx-xxx] assembled length leave blank for all black wire c: color coded wire, see color sequence table, sheet 3 (not available with fep option) color code *** not released for production fep cable option *** -t: fep (leave blank for standard pvc insulation) xx.xx (see note 17) fig. 2 (pmsdx-05-xx-xx-xx.xx-d-lus shown) (same as fig. 1, unless otherwise stated) c dwlx-01-xxxx-d-xx.xx-xx-xx c c * see notes 12 & 13 ** see note 14 *** sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: .165[4.19] socket discreet cable assembly by: pmsdx-xx-xxxx-xx-xx.xx-x-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 07/28/2004 3 1 sheet scale: 1:1 housing: valox 457, color: natural contact: phos bronze cable; insulation: see callout wire: see cale print (not lead free) metal latch: nickel-plated becu, #25, 1/2 ht f:\dwg\misc\mktg\pmsdx-xx-xxxx-xx-xx.xx-x-xxx-mkt.slddrw notes: 1. represents a critical dimension. 2. burr allowance: .003[.08] max. 3. parts to be molded to position. 4. minimum pin pullout force: 5.000lb[22.24n]. 5. contact must be inserted until retention feature locks into place. 6. all finished goods are to be layer packaged in shipping. 7. only available in tin plating. 8. all parts to pass electrical test upon assembly (including hi-pot test at 1000 volts dc). after final electrical test, label each assembly with 1 label-et. 9. applications involving severe bending require 6" minimum cable length. 10. deleted. 11. deleted. 12. -203 uses 20 gage 300 volt cable. 13. available only as an aso. 14. -206 uses 20 gage 600 volt cable. 15. minimum metal latch retention force: 1.000lb[4.45n]. 16. for crimp dimensions see dwl-01-xxxx-x-xx.xx-xx-xx for pvc applications or dwlx-01-xxxx-x-xx.xx-xx-xx for ptfe applications. 17. for lengths less than 12 in, tolerance shall be .125[3.18]. for other lengths, tolerances shall be 2%. 18. available to existing customers only, do not design as of revision p. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision s
-lus latch- end 1 latch- end 2 [latch up- cable straight] -lds latch- end 1 latch- end 2 [latch down- cable straight] -lux latch- end 1 latch- end 2 [latch up- cable crossed] -ldx latch- end 1 latch- end 2 [latch down- cable crossed] sheet of .165[4.19] socket discreet cable assembly by: pmsdx-xx-xxxx-xx-xx.xx-x-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 07/28/2004 3 2 sheet scale: 1:1 f:\dwg\misc\mktg\pmsdx-xx-xxxx-xx-xx.xx-x-xxx-mkt.slddrw revision s 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
.618 15.70 ref ipbd-xx-d-r fig. 3 (pmsdx-05-xxx-xx-xx.xx-s-m shown) (same as fig. 1, unless otherwise stated) ltc-14-01-n .125 ref 3.18 .388 9.86 sheet of .165[4.19] socket discreet cable assembly by: pmsdx-xx-xxxx-xx-xx.xx-x-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 07/28/2004 3 3 sheet scale: 1:1 revision s f:\dwg\misc\mktg\pmsdx-xx-xxxx-xx-xx.xx-x-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
